Installation Guide

4.2 Wire Guard Installation and Maintenance. When
installed, the wire guard helps protect the tempered glass lens from
damage.
4.2.1 Loosen the captive door screws. See Figure 3.
4.2.2 Slide the mounting loops in the wire guard over all four
screws.
4.2.3 Tighten captive door screws to 55 in. lbs. torque. This is
required for watertight door seal.
5. Limited Warranty and Limitation of Liability
The Holophane limited warranty and limitation of liability is published
in the "Terms and Conditions" section of the current Holophane
buyer's guide, and is available from your local Holophane sales
representative.
Figure 3
GR424
Acuity Lighting Group, Inc.
214 Oakwood Ave., Newark, OH 43055
IM-61-B 7/02 2002 Acuity Lighting Group Inc.
Visit our web site at www.holophane.com
Printed in USA
®
DISCONTINUED