Installation and Operation Instructions

3703B 101121
701 Millennium Blvd. | Greenville, SC 29607 | [phone] | [phone] - fax www.hubbellcontrolsolutions.com
Copyright © 2021 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product
identiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any
aliation with or endorsement by such respective owners.
72-00619 Rev E
DESCRIPTION
The Hubbell Control Solutions NXRM2 radio module allows NX distributed lighting controls to communicate wirelessly with wired and other
wireless components in the NX system.
SPECIFICATIONS
Classication Class 2 Device/Raintight
Electrical Ratings Input: 12-24 VDC
Control Connection Low Voltage SmartPORT™
Operating Environment
Operating Temperature: -40°F to 185°F [-40°C to 85°C]
Relative humidity (non-condensing): 0 to 95%, IP65 Rated
Construction Housing: GSM UL Rated 94 HB Plastic
Mounting Mounts through 1.2” D hole in xture housing
Dimensions
2.1”L x 1.5”D Overall (1.4”L x 1.2”D Stem)
53.34mm L x 38.1mm D Overall (35.56mm L x 30.48mm D Stem)
Weight 4.0 oz (113.4 g)
Color White, Black, or Gray
Patents Patent(s) Pending
Certications cULus listed, FCC Part 15.247, Conforms with UL916 and certied to CAN/CSA C22.2
Warranty Five-year limited
NXRM2-H INSTALLATION
The NXRM2 radio module is a self-contained assembly which includes the RF radio, Bluetooth® radio, control electronics, and antenna. A
threaded stem and lock nut are provided for mounting through a 1.2” aperture and xture housing. Located on the back of the unit, a pair (2) of
miniature SmartPORT™ connectors are used for connection to an NXFM xture module or other NX smart components.
1. Remove the lock nut from the threaded stem of the unit.
2. Insert the stem through the opening in the housing. See gure 1.
3. Carefully snug (do not overtighten) the nut against the housing making sure the gasket is pulled up tight against the housing. See gure 2.
4. Use the appropriate Hubbell manufactured cable to connect the radio module to the NXFM xture module. The second connector is
provided to allow a series connection with other NX modules.