User's Manual

WL-3002 User’s Manual
HL-TECH Corporation
7
Setup WL-3002 Configuration Utility
1. Station:
Figure 1-1
Open the WL-3002 Configuration Utility shown as Figure 1-1. The adapter can be set at
“Station” or “Access Point” Mode from the Mode drop down menu. Station mode is
selected for the item.
 You can site survey the neighboring SSID site by pressing the “Refresh”, then sites
name and signals strength of available SSID sites are shown on the “Available
Network” field.
 Double click the SSID site from “Available Network” field, and the SSID can be
connected directly.
 The information of the SSID is shown on the “ Current Network Information”.
 Show the BSSID of connecting AP on the “Link Status” filed.
 “Signal Strength” and “Link Quality” shown on diagrammatic curve, and described
with percentage.
 Record the number of Tx frames on the filed of “Tx Frame”.
 Record the number of Rx frames on the filed of “Rx Frame”.