User's Manual

WL-3002 User’s Manual
HL-TECH Corporation
15
2.1.1 WEP Key Setting
Press the “Setting” icon of WEP in Figure 2-2 to open the “WEP key setting” shown as
Figure 2-3.
Figure 2-3
 Modify the contents of “WEP Key setting”, when it is finished, press “Apply” to
save it. Select which key length 64,128 or 256 bits will be modified or used by “Key
Length” item. Select which key set will be use by the field of “Default Key ID”.
 Modify the 4 sets key depending on the selected key length on the field of “Key
Value”. The key value is used the hexadecimal format. Select which key format
“Hexadecimal” or “ASCII” will be used from the “Key Format”.