User's Manual

WL-3002 User’s Manual

HL-TECH Corporation

1.1.2.2 WPA Setting

Press “WPA Encryption Setting” in Figure 1-2 to enter the “WPA Setting” page

Figure 1-4

 You can select the WPA authentication protocol “TLS” or “PEAP” from “Protocol”

filed. The TLS is used , the User name and Password need not to be used , but the

Certificate need to be used. If the PEAP is used , the User name , Password and

Certificate need to be used.

 If you select “pre-share-key” protocol , you can write down your password on the

filed of “Passphrase” , the password length can be selected from 8 bytes to 63 bytes

(ASCII format) depend on user .