User's Manual

System Requirements
― Notebook PC or desktop PC with one free USB 2.0 port
― 32MB memory or greater
― 300MHz processor or higher
― Microsoft Windows XP / 2000 / Me / 98SE
Finder Function
1. When to use
This unique device is design for helping you to find a useable WLAN AP before
you turn on your PC or NB.
2. There is one button in middle of the device and 5 LED around.
Push the button all the way down and hold still for around 5 seconds till LED
stops blinking. LED 1, 2, 3 will start to blink and the light on later.
(1)：WLAN (Wi-Fi) detected with encryption Indicator
(2)：No WLAN (Wi-Fi) detected Indicator
(1) + (3)：WLAN (Wi-Fi) detected and without encryption Indicator
(4)：Battery Charge Indicator
(5)：Link Active Indicator
Important: When the device plug in PC or NB the finder function will set to disable.
The finder button is for searching wireless devices only before the device plug in
NB or PC.
( １ ) ( ２ ) ( ３ ) ( ４ ) ( ５ )