User Manual HKC P10H6
Index Introduction Installation ................................................3 Safety......................................................... 3 Warning/Caution .......................................... 4 Main unit description................................... 7 Remote Control ........................................... 8 Quick Setup.................................................... 9 Language ..................................................9 Country.................................................
Introduction Thank you very much for purchasing your LED TV. It serves as a normal colour TV and a PC monitor. To enjoy your set fully from the very beginning, read this manual carefully and keep it handy for future reference. INSTALLATION 1. Locate the TV in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. 2.
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to avoid the risk of electric shock, do not disassemble this equipment by anyone except a qualified service personnel.
Caution - - Caution High voltages are used in the operation of this product. Do not open the product’s casing. Refer servicing to qualified service personnel. - Caution To prevent fire or electrical shock hazard, do not expose the main unit to moisture. Do not place objects filled with liquids, such as vases, on the TV. Caution Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
Caution Caution Never stand on, lean on or suddenly push the product or its stand. You should pay special attention to children. Caution Do not place the main unit on an unstable cart stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall. Caution When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
Main unit tekst description Control Panel Button Function : Volume up. : Volume down : TV channel up. : TV channel down. : Press to select the main menu. : Select the input signal. : Switch on when in standby mode or to enter the standby mode. TV Connections Connect the USB to the USB jack on the set NOTE • It is only 500 mA MAX of DC current output when you connect with USB jack.
Remote tekst Control Switch the TV between on and standby mode. POWER P.MODE S.MODE MUTE EPG S.TITLE TEXT AUDIO VOL TV RADIO VOL+ CH+ SOURCE P.MODE Select the picture mode. S.MODE Select the sound mode. Mute and restore your TV sound. 0-9 0-9 numbers. Press to select a programme. EPG Displays the EPG (Electronic Programme Guide). S.TITLE Start or close subtitles (DTV and MEDIA mode). TEXT Access the Teletext items, if available (TV mode).
Quick Setup TV operation and system set up When you power on the TV first,you can find the follow menu,it will guide you to do some simple settings. Language Press the buttons to select the OSD language. Then press ENTER to enter the next step/page. Country Press the buttons to select the country. Then press ENTER to enter the next step/page.
Quick Setup DTV Type Press the buttons to select the DTV Type DVB-C (Cable) or DVB-T (Terrestrial). Then press ENTER to enter the next step/page. Subtitle and Audio Language settings Press the buttons to select the item and then press to select the options. You can set the primary and secondary subtitle language, primary and secondary audio language on this options. Then press ENTER to enter the next step/page.
Quick tekst Setup Auto tuning If you set the DTV type to Terrestrial,you will find the follow menu for search the channel. Press the buttons to select the item and then press to select the Tuning Mode: DTV or ATV or DTV and ATV.
Quick tekst Setup If you set the DTV type to Cable,you will find the follow menu for search the channel. Tuning Mode Press to select the Tuning Mode: DTV or ATV or DTV and ATV. Scan Type Press to select the Scan Type: Full Scan or Network Search. Network ID This option is only available in the network Search is activated. Press number keys (0-9) to set the Network ID or automatically search for ID address. Frequency This option is only available in the network Search is activated.
Source tekst Select Input Source Press SOURCE to display the input source list. Press to select the input source you want to watch. Press ENTER to enter the input source.
Main Menu tekst (OSD) Main Menu (OSD) Press MENU to open the MAIN OSD MENU. Press to select the menu item you want to adjust. Press ENTER or to enter the sub menu. Press to select the option and then press ENTER to enter the sub menu. Then press to adjust or press to select the sub menu. Confirm selection with ENTER . Press MENU to skip or EXIT to stop.
Picture tekst menu Picture menu The picture is for a reference only, the actual item is the standard. Press MENU to open the MAIN OSD MENU. Press to select PICTURE in the main menu and then press ENTER to enter. MENU Press to select the option that you want to adjust in the Picture menu and then press ENTER or to enter the sub menu. Press to adjust or press to select. And press ENTER to select the sub menu.
Picture tekst menu You only can change the value of brightness, contrast, sharpness, color, when the picture is in User mode. TIP: You can press P-MODE button on the remote control again and again to change the picture mode directly. Contrast: Press to select Contrast, then press ENTER to enter and press to adjust. Then press MENU to return back the previous menu directly. MENU Brightness: Press to select Brightness, then press ENTER to enter and press to adjust.
Sound tekst menu Sound menu The picture is for a reference only, the actual item is the standard. Press MENU to open the MAIN OSD MENU. Press to select SOUND in the main menu and then press ENTER to enter. MENU Press to select the option that you want to adjust in the Sound menu and then press ENTER or to enter the sub menu. Press to adjust or press to select. And press ENTER to select the sub menu. After finishing your adjustment press MENU to save and return back to the previous menu.
Sound tekst menu You can change the value of bass and treble, Balance and EQ, when the sound is in User mode. TIP: You can press S-MODE button on the remote control to change the Sound Mode directly. Bass: Press to select Bass, then press ENTER or to enter and press to adjust. It can only be adjusted under user mode. Then press MENU to return back the previous menu directly. MENU Treble: Press to select Treble, then press ENTER to enter and press to adjust.
Sound tekst menu Digital Audio Output: Press to select Digital Audio Output, then press ENTER to enter and press to select. Available in S/PDIF mode: OFF, PCM, AUTO). Audio Description Press ENTER or to enter the menu in the DTV source. You can open the audio description and adjust the Mixing Level. Press ENTER or to enter and press to adjust. Then press the previous menu directly.
Channel tekstmenu Channel menu The picture is for a reference only, the actual item is the standard. Press MENU to open the MAIN OSD MENU. Press to select CHANNEL in the main menu and then press ENTER to enter. MENU Press to select the option that you want to adjust in the Channel menu and then press ENTER or to enter the sub menu. Press to adjust or press to select. And press ENTER to select the sub menu.
Channel tekstmenu Channel Edit Press to select CHANNEL EDIT and then press is selected. The menu will appear as follows: ENTER to play the channel that Press on the remote control to delete the channel that is selected. Press on the remote control to move down the channel that is selected. Press on the remote control to lock the channel that is selected. Press on the remote control to skip the channel that is selected. Select FAV to set the favorites channels.
Channel menu DTV Type Press to select DTV TYPE, then press to select. (Available DTV Type: Cable DVB-C, Terrestrial DVB-T). Auto Tuning Press to select AUTO TUNING, and then press ENTER to enter (When the System Lock is on, please input the PIN code to unlock). Select to open the auto searching page and press 22 ENTER to start the scan.
Channel menu ATV Manual Tuning Press to select ATV MANUAL TUNING and then press DTV Manual Tuning Press to select DTV MANUAL TUNING and then press 23 ENTER to start the scan. ENTER to start the scan.
Channel menu DTV Settings Press to select DTV SETTINGS and then press menu. ENTER to enter the sub User can set the local time settings, DST, LCN, subtitle and audio on this options. Set LCN on ON to put the channels in a logical order.
Operation menu Operation menu The picture is for a reference only, the actual item is the standard. Press MENU to open the MAIN OSD MENU. Press to select OPERATION in the main menu and then press enter. MENU ENTER or to Press to select the option that you want to adjust in the Operation menu and then press ENTER or to enter the sub menu. Press to adjust or press to select. After finishing your adjustment press MENU to save and return back to the previous menu.
Operation menu Menu Language: Press to select MENU LANGUAGE, then press ENTER or to enter the sub menu. Then press to select. Press ENTER or to confirm. Teletext Language: Press to select TELETEXT LANGUAGE, then press ENTER or to enter the sub menu Then press to select. Press ENTER or to confirm. System Lock: Press to select SYSTEM LOCK, then press sub menu with the password 0000.
Operation menu Parental Control: Press to select PARENTAL CONTROL, then press ENTER or to enter the sub menu. Then press to select Rate (From 4-17 or None). Press ENTER or to confirm. Key Lock: Press to select KEY LOCK, then press to select ON or OFF. ENTER to enter and press Change Password: Press to select CHANGE PASSWORD , then press to enter and Change Password menu will appear as follows: ENTER Enter the new password in ‘New password’.
Operation menu Record Menu: Press to select RECORD MENU, then press sub menu. The new sub menu will look as follows: ENTER to enter the Schedule: Press to select SCHEDULE, then press ENTER to enter and the sub menu will appear as follows (you will set the schedule task): Record: Press to select RECORD, then press function is same as the hot key of REC. ENTER to enter record. The Time Shift: Press to select TIME SHIFT then press function is same as the hot key of Timeshift.
Operation menu PVR File List: Press to select PVR FILE LIST, then press ENTER to enter the sub menu. You will play the record file. Press to select the file and press the ENTER to play. Disk Setup: Press to select DISK SETUP, then press ENTER to the sub menu where you can select and/or format the external disk which is connected by USB.
Setup menu Setup menu The picture is for a reference only, the actual item is the standard. Press MENU to open the MAIN OSD MENU. Press to select SETUP in the main menu and then press ENTER to enter. MENU Press to select the option that you want to adjust in the SetUp menu and then press ENTER or to enter the sub menu. Press to adjust or press to select. After finishing your adjustment press MENU to save and return back to the previous menu. Press EXIT to exit the entire menu.
Setup menu OSD Timer: Press to select OSD TIMER. Press to select how long the OSD Menu has to stay on the TV. (Available OSD Timer: 10 sec., 20 sec., 30 sec., 40 sec., 50 sec., 60 sec. or off). Then press ENTER to confirm. Blue Screen: Press to select BLUE SCREEN. Press to select On or Off. Then press ENTER to confirm. Sleep Timer: Press to select SLEEP TIMER,. Press to select how long the TV has to stay on before it turns off by himself.
Electronic Program Guide (EPG) Press EPG on the remote to display the EPG programmers list. Then press to show the different EPG info. The menu looks as follows: Press on the remote control to switch between the TV or Radio channel. Press on the remote control to select previous day program info. Press on the remote control to select next day program info. on the remote control to enter the schedule list menu. Press Select FAV to set the favorites channels.
Direct record How to Direct Record In the DTV source, you can start record function by press the “REC” key while program playing. Before that, you have to make sure the USB storage device is inserted and the device checking and initialization is done. If you press “REC” key when there’s no USB storage device inserted, the prompt window will appear as follow: If you press “REC” key during the device checking and Initialization, the prompt window will show black screen about 2 seconds.
Time shift How to Time shift In the DTV source, you can start time shift function by press the key while program playing. Before that, you have to make sure the USB storage device is inserted and the device checking and initialization is done. If you press key when there’s no USB storage device inserted, the prompt window will appear as follow: If you press key during the device checking and initialization, the prompt window will show black screen about 2 seconds.
Time shift PLAY/PAUSE: you can set the play mode PLAY/PAUSE STOP: you can stop the recording, it will appear the menu for check whether to stop the recording. AB: you can set two point for play the record file from A to B. FF: you can set the play mode Fast Forward; FR: you can set the play mode Fast Rewind; PRVE/NEXT: you can play the record file to previous/next for 30 seconds. After record started, you can press the button of PLAY/FF/FR/PRVE/NEXT on the remote control.
Media Operation The picture is for a reference only; the actual item is the standard. Note: Before operation MEDIA menu, plug in USB device or memory card, then press SOURCE button to set the Source to Media. Press to select HDMI/USB in the Source Menu and then press enter. ENTER or to Press to select the option that you want to select in the Media menu and then press ENTER or to enter the sub menu.
Photo Photo The picture is for a reference only; the actual item is the standard. Press to select PHOTO in the main menu and then press ENTER to enter. Press EXIT to return back to the previous menu. Press to select the photos, press ENTER or to view. You can see the information of the current playing photo after press INFO to play or pause, you can see the playing state in the button, then press right. Then press or to ratite the picture.
Music Music The picture is for a reference only; the actual item is the standard. Press to select MUSIC in the main menu and then press ENTER to enter. Press EXIT to return back to the previous menu. Press to select the music, press ENTER or to listen. Press playing. Press to return back to previous page. or EXIT You can see the information of the current playing media at the first few seconds or after press INFO button.
Movie Movie The picture is for a reference only; the actual item is the standard. Press to select MOVIE in the main menu and then press ENTER to enter. Press EXIT to return back to the previous menu. Press to select the movie, press ENTER or to view. Press playing. Press to return back to previous page. or EXIT to stop You can see the information of the current playing media at the first few seconds or after press INFO button.
Specifications tekst HDMI-input Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (KHz) 480i 720 x 480i 15.73 59.94/60 31.47 59.94/60 VGA 576i 640 x 480 31.47 720 x 576i 15.63 576p 720 x 576p 720p 1.280 x 720p 1.080i 1.920 x 1.080i 1.080p 1.920 x 1.080p 31.26 37.50 44.96 28.13 33.75 56.25 67.5 480p 720 x 480p 59.94 50 50 50 59.94/60 50 59.94/60 50 59.94/60 Due to continuous product development, specifications are subject to change without prior notice.
Troubleshooting tekst Before contacting our service department you can go through the following for possible solutions. Problem Solution No picture, no sound • Check the cable between TV and antenna/external AV device. • Press the power button on the remote. • Press the SOURCE button the remote, then press the button repeatedly to select the TV source.
Troubleshooting tekst USB files are played jerkily • The speed of the USB storage device can affect the speed of data transfer to the TV, preventing image and / or sound from being smoothly displayed. The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated technology to produce. However, there may be a small number of bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Useful Information tekst and Licences Guarantee We regret it when a HKC product doesn’t work as it should, despite our careful quality control. That is why we offer a 2-year manufacturer’s warranty after the date of purchase on all our models. This guarantee is a pick-up and return guarantee. This means that we take care of the return of the product to our repair and service center. We will thoroughly check the product and solve the problem. We will send the product back to your home within 7 working days.
Useful Information tekst and Licences EC directives internet address: https://eur-lex.europa.eu/browse/summaries.html?locale=en The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
About HKC The HKC brand was established in 1997 as a manufacturer of PC monitors thanks to the good quality and specific technical production process. HKC quickly grew into a TOP 3 Producer of monitors on the Chinese market. In 2003 HKC started producing LCD televisions, over the years, HKC has bought many suppliers which now makes all parts of the TV in-house, so HKC has one of the only open-cell assembly lines where the LCD of the TV is made.
