User Guide

Copyright HK Instruments 2021 www.hkinstruments. User guide version 1.0 2021
Page 3
Step 1: Choosing the measurement values on the display
OK
+
–
Celsius [1]
Fahrenheit [ ]
CO2 [3]
Humidity [2]
CO2 EQ [ ]
IAQ [4]
1
1
2
3
1 2
1 2
3 4
1
2
3
4
5
21.1
°
c
42.3
%
RH
CO
2
510
PPM
TVOC
IAQ
2
10 s
2) Choose Display values.
Figure 1a
OK
+
–
Settings
Display values
Brightness
Outputs
OK
+
–
Celsius
Fahrenheit
CO2
Humidity
[1]
[ ]
[3]
[2]
CO2 EQ
IAQ
Exit
[ ]
[4]
The basic view on the display is scaled based on how many measurement values have been chosen to be viewed on the display.
1-4 measurement values can be shown simultaneously (see gure 1a). If ve or more values are selected, the measurements are
shown one by one and the view changes every 10 seconds. Individual measurements can be scrolled in the basic view with and
buons. If the buons are unused for 30 minutes, the basic view will reappear automacally.
+
–
1) Press to enter the sengs menu.
OK
3) Choose the desired measurement values to be shown on
the display.
• Scroll the menu by pressing the and buons.
• Add/remove the desired measurement values by
pressing the buon.
–
+
OK
OK
+
–
Humidity
CO2 EQ
IAQ
Exit
[2]
[ ]
[4]
Step 1.1: Display view
Step 1.2: Choosing the measurement values
4) Choose Exit to exit the menu.
• Scroll the menu to Exit and press to return
to the sengs menu or keep the buon
down to return to the basic view.
OK
OK
Figure 1b
For more informaon about the measurements, please see page 8.
Figure 1c
Figure 1d