Parts List

2. Active speaker connection to passive speaker
Insert the end of the speaker connection cable into the SPEEAKER OUT of the active
speaker and the SPEAKER IN of the passive speaker. Make sure the pins are fully
inserted to avoid loose connection.
3. Connecting with computer or other sound source
Insert the RCA connectors of the RCA to 3.5mm cable into the audio input terminals of
the active speaker, red to red and white to white. Then insert the 3.5mm stereo jack to the
stereo output of your computer.
4. Connecting the power
Make sure the power switch is off, plug the power cable into the power outlet.
The M200MKIII+ is built in with amplifier. On the back there are power outlet, audio in
and volume control. The connection diagram is as below:
1. Diagram of active speaker connected to passive speaker
V. Speaker Connections
Active speakerPassive speaker
Bluetooth
Power
CD player or TV with optical
Computer
Model:
Multimedia Active Speaker
POWER
AC120V~60Hz 130W
OFF
ON
Swan Speakers Inc.
Made in China
1. Turn on the computer or other sound source, turn on the volume control to minimum(0).
2. Play the MP3, CD, and turn up the volume gradually.
3. You can use the three function knobs on the back panel to adjust the volume to meet
your listening habit.
Notice:
a. Turn off the power when you are not going to listen.
b. We suggest using a high quality sound card so that it can produce the best possible
high-fidelity sound. Using a poor quality sound card will degrate the sound quality.
Break-in refers to the aging period for the speakers to where they perform best
acoustically. Upon purchase the speakers are not broken-in. A period ranging from 48-400
hours of usage is recommended before both the amplifier and speaker drivers behave
optimally.
The M200MKIII+ can be operated under normal conditions without requiring
any maintenance. Avoid using any corrosive liquids or gasses on the surface of
the cabinet or on the speaker drivers. Do not place in high temperatures, moist
conditions, or sunshine for long periods of time. For cleaning be sure to use a
detergent without any strong chemicals.
Notice:
a. Please make sure the power is switched off when connecting the power cable.
b. The speaker is built-in with amplifier. Please do not stuff the rear port with anything. It
can destroy the amplifier.
c. Make sure connections are firm to avoid influencing sound quality.
d. The quality of cables will directly influence the sound quality. We suggest using the
original cable.
VI. Listening
VII. Break-in
VIII. Maintenance