+ Swan Speakers Inc.
I. Unpacking This speaker adopts fine packing material to protect it from damage during shipping. Please check if all accessories are in the box. II. Figures of speaker functions and electrical parts Front of Active speaker Back of Active speaker 01 02 Model: Multimedia Active Speaker 03 POWER 05 06 04 14 OFF ON AC120V~60Hz 130W Swan Speakers Inc.
01. Tweeter 02. Signal Indicator 03. Woofer 04. Bass volume control 05. Treble volume control 06. Volume control 07. Rear port 08. Optical input 09. Coaxial input 10. RCA input Line1 11. RCA input Line2 12. Speaker output 13. Power switch 14. Power plug 15. Speaker input to active speaker 16. Power cable 17. Speaker connection cable 18. 3.5mm to RCA audio cable 19. Optical cable 20. Manual 21. Remote Control Volume control function XI.
Avoid Magnets Do not touch the drivers with hands Avoid corrosive liguids and gases Do not place in high heat and humidity for extended period of time Remote control introductions 1. After the speakers are connected properly, turn on the power when the indicator light is red, the speaker is in Standby mode. Press the Standby button, the indicator is green when the speaker is in working mode and default input is LIN1. 2.
V. Speaker Connections The M200MKIII+ is built in with amplifier. On the back there are power outlet, audio in and volume control. The connection diagram is as below: 1. Diagram of active speaker connected to passive speaker Passive speaker Notice: a. Please make sure the power is switched off when connecting the power cable. b. The speaker is built-in with amplifier. Please do not stuff the rear port with anything. It can destroy the amplifier. c.
