User Manual

TABLE OF CONTENTSHIVE LIGHTING7 8
Do not position or mount the product near
open flames.
Unobstructed airflow is required for effective
cooling. Allow minimum of one inch clearance
around air vents for proper ventilation.
FCC Information
This equipment has been tested and found
to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual,
may cause harmful interference to radio
MAINTENANCE:
communications.
Help prevent damage and prolong the
life of your equipment by following these
suggestions:
With the unit unplugged, lightly wipe the outer
metal housing with a soft, clean towel and
blow with compressed air.
Clean the control panel with cotton swabs
wetted with isopropyl alcohol.
Clean the reflector and lenses with a dry
chamois or compressed air. Avoid touching
any of these components with your fingers
directly.
Do not operate product when operating
environment is in excess of 40° C (115° F).
Do not misuse the power connector to hold,
move or suspend the fixture.
Disconnect all cables prior to transport.
Store light in a cool, dry place (between 5 -
23°C) .