User Manual

CONTROLS / CONTROL PANELHIVE LIGHTING29 30
CONTROLS
CONTROL PANEL
1. On/Off Switch - Controls Power. The power
indicator light above the display illuminates
when power is on.
2. DMX Mode On/Off Switch - Controls DMX
mode when unit is attached to a DMX board
(See Page 20 for more instructions). The DMX
indicator light, above the display, illuminates
when the fixture is in DMX mode.
3. Left “Selector” Knob - Selects the S.H.O.T.™
property.
4. Right “Adjustment” Knob - Selects the
S.H.O.T.™ property’s desired value. When
in DMX mode, this knob is used to adjust the
light’s starting DMX address.
5. DMX IN Socket - Connect fixture to your DMX
board via a 5-pin XLR cable.
6. DMX OUT Socket - Connect fixture to another
light via a 5-pin XLR cable when using one
DMX board to control multiple units. All C-Se-
ries lights follow DMX512 standards, allowing
multiple lights to be “daisy chained” together.
The device is self-terminating to maintain data
integrity.
7. Power Socket - Connect the fixture to valid
power source via the 4-Pin XLR power cable
that comes included with adapter (For XLR Pin
wiring Pin 1- DCV In and Pin 4+ DCV In).
8. Display - Provides digital readout for values of
all controllable light properties.
9. USB Port - Used to connect light to computer
when firmware updates are made available by
Hive.