User Manual

page 22
APP CONTROL (VIA BLUETOOTH)
1. Download the iOS app to your iphone or ipad that is
running iOS 8.1 or later as well as Bluetooth 4.0 or
later.
2. Make sure Wasp 100-C™ is on.
3. Turn on your iOS device’s bluetooth connection.
4. Open the app on your device & Click “Scan.
5. Find your
Wasp 100-C™ in the scan results, indicated by the
serial number of the LED array itself. This is the
unique address of the light.
6. Click on your light in scan results and your
mobile device will attempt to make a bluetooth
connection.
7. Once connected, use the
sliders for the four S.H.O.T.™
properties to control the
light wirelessly. Your unit
will respond in real time.
For more information on the
value ranges in the app, see
the tables on the following
pages.
NOTE: Control of the light via the app
will override any input from DMX board
or local controls. However, adjustment
of S.H.O.T.™ values in app will NOT be
reflected in the light’s digital display.
Policies