User Manual

page 12
NOTE: The Wasp 100-C™ is compatible with a broad range of Hive-
branded and third party accessories. For more information, please
visit Hive’s website at http://hivelighting.com/hive-products/
accessories.
CONTROL PANEL FEATURES
8. On/Off Switch - Controls Power. The power light
above the display illuminates when power is on.
9. DMX Mode On/Off Switch - Controls DMX mode
when unit is attached to DMX board. (See page 20
for more instructions.) The DMX indicator light,
above the display, illuminates when Wasp 100-C™
is in DMX mode.
10. Left “Selector” Knob - Selects the S.H.O.T.™
property.
11. Right “Adjustment” Knob - Selects S.H.O.T.™
property’s desired value. When in DMX mode, this
knob is used to adjust the light’s starting address.
12. DMX IN Socket - Connect Wasp 100-C™ to your
DMX board via a 5-pin XLR cable.
13. DMX OUT Socket - Connect Wasp 100-C™ to
another light via a 5-pin XLR cable when using
one DMX board to control multiple units. The
Wasp 100-C™ follows DMX512 standards, allowing
multiple lights to be “daisy chained” together.
14. Power Socket - Connect Wasp 100-C™ to valid
power source via the 4-pin XLR power cable that
comes included with adapter (For XLR pin wiring