User Manual

page 10
• Do not misuse the power connector to hold,
move or suspend the fixture.
• Disconnect all cables prior to transport.
• Store light in a cool dry place (between 5 - 20°C) .
TIPS & TROUBLESHOOTING
It is rare but possible for the reflector to become unfixed,
either during transport or during storage. If this happens,
simply re-secure it by twisting it clockwise until the
reflector plate engages the pins locking it into place.
It is generally acceptable to operate the light on external
shoots but when operating the light in damp or wet
conditions be sure to monitor the light to ensure that no
water is accumulating inside of the housing.
When using a battery pack, remember that the light uses
80W when at full output. This requires a battery with a
minimum power rating of 90Wh, although we recommend
batteries rated for 100 Wh or higher and with a minimum
10 amp hour fuse. Exact run time is based on the individual
battery’s storage capacity.
If you need to adjust one of many Wasp 100-C™ units via the
app and have forgotten what it is named in the app’s scan
results, try reducing the Bluetooth Discovery Distance to
1 meter (available in the app’s main settings) and rescan
with your phone next to the specific light in question.