User Manual

page 9
FCC INFORMATION
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Caring for your Wasp 100-C™
MAINTENANCE
Help prevent damage and prolong the life of your equipment
by following these suggestions:
• With the unit unplugged, lightly clean the outer
metal housing with a soft, clean towel and
compressed air.
• Clean the control panel with cotton swabs wetted
with isopropyl alcohol.
• Clean the reflector and lenses with a dry chamois
or compressed air. Avoid touching any of these
components with your fingers directly.
• Do not operate product when operating
environment is in excess of 50 °C.