User Manual

CONTROLS / PHONE APPHIVE LIGHTING47 48

PHONE APP

1. App Control (Via Bluetooth)

2. Download the iOS app to your iphone or ipad

that is running iOS 8.1 or later as well as

Bluetooth 4.0 or later.

3. Make sure ﬁxture is switched on.

4. Turn on your iOS device’s bluetooth

connection.

5. Open the app on your device & click “Scan.”

6. Find your ﬁxture in the scan results, indicated

by the serial number of the LED array itself.

This is the unique address of the light.

7. Click on your light in scan results and

your mobile device will attempt to make a

bluetooth connection.

8. Once connected, use the sliders for the four

S.H.O.T.™ properties to control the light

wirelessly. Your unit will respond in real time.

For more information on the value ranges in

the app, see the tables on the following pages.

FIRMWARE UPDATES

All C-Series Lights are designed to receive periodic

ﬁrmware updates, which will be made available via Hive.

Once notiﬁed, connect your unit to your computer via a

USB cable using the USB port in order to complete the

ﬁrmware installation.

NOTE: Control of the light via the app will override any input from DMX board or local

controls. However, adjustment of S.H.O.T.™ values in app will NOT be reﬂected in the

light’s onboard digital display.