User Manual

CONTROLS / CRMX (WIRELESS DMX) HIVE LIGHTING41 42
CRMX (WIRELESS DMX)
BY LUMENRADIO
1. Engage DMX Mode: Flip the DMX Mode On/
Off Switch to the up position, causing the DMX
indicator light to turn on. This light tells you
that you are now in DMX mode and can use
a DMX board or CRMX transmitter to control
the light.
2. To Select Lumen Radio from the DMX input
menu:
a. Double click the selection knob to
enter the DMX menu.
b. Once the DMX menu is open single
click the selection knob to select
DMX input.
c. Rotate the selection knob to select
between CRMX and Local Wire.
Select CRMX for wireless control,
then single click the selection
knob to exit to the main DMX menu
double click to exit the menu.
a. Ensure the antenna is connected.
b. Power on the transmitter and
receiver(s).
c. Ensure that the RF Link indicators
on all receivers are off to indicate
3. When you have successfully selected Lumen-
Radio the DMX menu will now read CRMX on
the OLED display on the back of the C-Series
fixture.
4. Link your LumenRadio transmitter. To suc-
cessfully use wireless DMX with the C-Series
lights, you must have a LumenRadio (CRMX)
enabled transmitter connected to your DMX
controller. To link your transmitter: