User Manual

C-SERIES ACCESSORIES / MOUNTINGHIVE LIGHTING25 26
Attaching Light Modifiers
The Photo Yoke is designed with two unique
mounting points unlike the Standard Yoke or
Studio Yoke. The Photo Yoke itself also serves
as a Four-Point Speed Ring, allowing Square
and Rectangular Softboxes to be connected
directly to the yoke itself without the need for
additional mounting accessories.
The Photo Yoke also has a mounting point
in the base of the yoke for photographic
umbrella attachments. To attach a standard
photo umbrella insert the metal pole of the
umbrella into the mounting point on the top
half of the photo yoke base, just above the tilt
lock. Once the umbrella is inserted securely
position the umbrella the desired distance
from the face of the C-Series fixture. Then
secure the umbrella position by tightening the
threaded knob above the tilt lock until the bolt
of the threaded knob is holding the umbrella
pole inside the mounting point securely. The
umbrella will now pan and tilt with the fixture.
Tilting (Vertical Adjustment)
Loosen the tilt lock on the yoke until the light
can move freely. Adjust the light upward or
downward at any angle between 0° and 180°
(vertical). Secure the tilt lock once the desired
angle is reached.
Panning (Horizontal Adjustment)
Loosen the mount lock on the yoke. Freely
adjust the light left to right up to a full 360°
horizontal rotation. Secure the mount lock
once the desired angle is reached.