Installation Guide

Hitron Technologies Americas4

Method D: Wi-Fi to Wi-Fi Setup via WPS

Use the power cord to connect the POWER port to a power outlet.

(see Step 4 picture)

1 Login to the gateway web page and turn on WPS.

2 Press the WPS button on the Gateway.

3 Press the WPS button on the back of the HT-EMN3. The HT-EMN3 WPS

LED will start blinking. WPS LED will become steady when active and

ready. Your HT-EMN3 is ready (don’t do Step 4). Go to step 4

Step 4: Connect HT-EMN3 to a Power Outlet

1 Ensure you are connected to gateway via method A, B or C

2 Use the power cord provided to connect the POWER port

to a power outlet.

3 AutoSync will start. Wait for 2 mins to complete setup. (WPS LED will

stop blinking green/red)

4 If you used Method C (WiFi to WiFi), unplug your HT-EMN3 (power and

Ethernet) and power it on at its ﬁnal location.

Method D: Wi-Fi to Wi-Fi Setup via WPS

Gateway

HT-EMN3 WiFi Extender

Power Outlet

Power Cable

HT-EMN3 WiFi Extender