HTB-1026 BLU-RAY DISC PLAYER Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference.
Content Important Safety Instructions 2 1. Overview 3 2. Front Panel and Rear Panel Illustration 4 3. Output Illustration 7 4. Remote Control 9 5.System Setting 11 6. Audio, Video, Picture files on disk or USB devices 15 7. BD-Live Operation 20 8. Trouble shooting 22 9.
Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) 8) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, install in accordance with the instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized plug.
1. OVERVIEW This BD player has the capability of providing high-definition, cinema-like pictures and multi-channel audio. Soundtracks in more than one language are usually included on the disk, and subtitles in more languages are often included as well. 1.
2. Front Panel and Rear Panel Illustration 2.1 Front panel 1 2 3 4 1 CABIN DOOR 5 PLAY/PAUSE BUTTON 2 DISPLAY 6 POWER 3 SENSOR 7 USB 4 OPEN/CLOSE BUTTON 2.2 Rear panel 1 2 3 4 5 6 HDMI output 1 2 CH Audio output(L,R) 4 2 Digital Audio COAXIAL output 5 LAN 3 COMPOSITE CVBS output 6 USB 2.
2.3 TV Set Connections HDMI R L VIDEO AUDIO IN VIDEO IN HDMI IN 2.3.1 CONNECT BD PLAYER TO TV SET BY AV CABLE Connect the BD player s L and R jack to the audio input jack on the TV. Connect the BD player s video out jack to the video input jack of TV. 2.3.2 CONNECT THE BD PLAYER TO TV SET USING THE HDMI OUTPUT Use the HDMI cable (not supplied) to connect BD player to your TV. Notes: The player supports video resolution up to 1080p 60Hz on HDMI output.
2.3.3 Connecting to an AV Amplifier with Digital Audio Input Coaxial cable Coaxial Digital Amplifier Notes: 1. Select the Coaxial digital audio output. 2. Set the digital Amplifier to the AV input connected to the BD player.
3. Output Illustration 3.1 Video Output Capabilities Each of the video outputs are capable of different levels of functionality, as described in the table below. Actual output will depend on setup menu settings and TV capabilities for HDMI televisions. Resolutions Supported Resolutions Supported (NTSC Models) (PAL Models) BD Player Video Output HDMI Composite Video 1080p 60/30/24 1080i 720p 480p 480i 1080p 50/25/24 1080i 720p 576p 576i NTSC SD (480i) PAL SD (576i) 3.
3.3 Connectors Description 3.3.1 SPDIF Digital Audio Output The SPDIF output is a digital audio output. If you have a surround-sound receiver with a SPDIF (coaxial)input, connect this output to the coaxial input of the surround sound receiver. 3.3.2. Stereo Audio Outputs These are analog, “old fashioned” stereo (left/right) outputs. If your TV does not have an HDMI input, you can connect these outputs to the stereo audio inputs of a TV. 3.3.3.
4. Remote Control STANDBY OPEN/CLOSE 19 1 ANGLE SUBTITLE AUDIO POP MENU/TITLE MENU RANDOM 20 21 22 2 3 4 5 BONUS VIEW SECONDARY AUDIO 6 SECONDARY SUBTITLE 7 8 ENTER SETUP 23 9 DISPLAY STEP SLOW FWD PREV 10 11 24 REV NEXT 25 12 26 27 13 MUTE + VOL 14 STOP 15 16 1 2 3 4 5 6 28 29 30 31 7 8 0 GOTO CLEAR REPEAT A-B RETURN 9 17 18 1.Open/Close Press this button to open/close the disk tray. 2.
16.STOP This button stops playback of a BD/DVD movie or files on disk. 17. CLEAR When entering numeric values via the numeric keypad , this button is used to clear a number entered incorrectly. 18.GOTO This button is used with the numeric keypad to jump to a specific track on an audio CD. 19. STANDBY Press the STANDBY button to turn the BD player on or off. Note: Press STANDBY key during system (about 20s) startup will be no effect.
5.System Setting Press SETUP button under stop status or press RIGHT button in main menu. System will bring out setting menu as below picture: Main Menu Setting Menu System Network Settings Info Display Audio Language Parental 5.1Language 5.1.1 5.1.2 5.1.3 5.1.4 OSD: set language used for user interface displayed . Menu: set language used for BD/DVD menu (not available on all disks). Audio: select audio language for BD/DVD disk (not available on all disks) .
5.2Display 5.2.1 TV Type: Select to output NTSC or PAL video format . 5.2.2 Resolution: Set maximum resolution of your TV here to get best video quality, if you are not sure, please use HDMI Auto, system will read the preferred resolution your TV supported via EDID. 5.2.3 TV Aspect: Select right video ratio based on your TV. ( Refer to below table) Note: Aspect setting only effect HDMI and component output, and 4:3 setting has no effect if resolution has been set to 720p or 1080i or1080p).
5.3 Audio 5.3.1 PCM Downsampling: select right bitrate for PCM signal to ensure your SPDIF receiver can handle it correctly. It's no effect for HDMI digital audio output. 5.3.2 Digital Output: If you only have two speakers, set PCM stereo. If you connect receiver with more than two speakers, please refer to below tables: Bitstream Bitstream Bitstream Bitstream Bitstream Set to Bitstream HD for disks with DTS-HD soundtracks. Bitstream mixed Set to Bitstream HD for disks with Dolby TrueHD soundtracks.
5.4 System 5.4.1 Optical Disc Auto Play: This option is used to tell the BD player whether or not to start loading the main title menu of a disk as soon as the disk tray is closed. 5.4.2 BD-Live Internet Access: Control BD player accessing internet Limit access : Only allow the inserted Blu-Ray disk to download content from a BD-Live website which has a valid online certificate. This will reduce the chances of downloading malicious content onto the player.
5.5.8 Secondary DNS: Show current Secondary DNS or access user input while in “Manual” IP mode. Press ENTER key while Apply button is highlighted to activate setting you made, or press ENTER key while Cancel button is highlighted to cancel changes you made for network settings. 5.6 Info This item shows software and hardware information for loader and main board, no changes are allowed. 5.7 Parental 5.7.1 Parental Country: Use this menu item to tell the BD player what country you are in.
6.4 Browsing video files 6.4.1 Select Videos icon in main menu which will appear after BD player read out disk or/and USB device. Press ENTER key while Video icon is highlighted, system will bring out a sub menu for file source selection.(Figure 5-1) Videos Optical Disk Settings Playlist Music USB Pictures Figure 5-1 Video Media Selector 6.4.2 Select disk or USB to open a browser which allow you to view files on current disk/ USB device, so you can choose any files you want to play.
6.5 Browsing Audio files 6.5.1 Select Music icon in main menu which will appear after BD player read out disk or /and USB device. Press ENTER key while Music icon is highlighted, system will bring out a sub menu for file source selection.( Figure 5-3 ) Videos Optical Disk Settings Playlist Music USB Pictures Figure 5-3 Audio Media Selector 6.5.2 Select disk or USB to open a browser which allow you to view files on current disk / USB device, so you can choose any files you want to play .
6.6 Browsing picture files 6.6.1 Select Pictures icon in main menu which will appear after BD player read out disk or/and USB device . Press ENTER key while Pictures icon is highlighted, system will bring out a sub menu for file source selection.( Figure 5-5) Videos Optical Disk Settings Playlist Music USB Pictures Figure 5-5 Picture Media Selector 6.6.2 Select disk or USB to open a browser which allows you to view files on current disk/USB device, so you can choose any files you want to play.
6.7 File playback 6.7.1 Refer to Figure 5-7, select “ Play All” to play all selected type files on selected media, or select ”Play Current Folder” to play all selected type files in current folder. Folder1 Add all to Playlist Previous folder Folder2 Play All … Play Current Folder File1 Play File Cancel File2 ... Please select play mode ... Figure 5-7 Multi-files operation 6.7.2 Also you can choose to play current highlighted file refer to Figure 5-8.
7. BD-Live Operation 7.1 Description Some (but certainly not all) BD disks contain additional features that are made available to players that are connected to the internet, and have additional memory added.
7.4.3 The player will connect to internet and show download menu as below picture. Note: This can take several minutes. 7.4.4 You can select the content to download from the Previews sub menu. Note: This can take several minutes. 7.4.5 The downloaded content is stored under My Downloads. You can choose to either play back or delete the downloaded content 7.5 BD-Live Notes 7.5.1 This player only supports the connection of USB memory in order to store BD 2.0 downloaded content 7.5.
8. Trouble shooting Ensure you have entered the correct AV input for your TV. Ensure you have entered the correct AV input for your TV.
9. Specifications General Power requirements: AC 100-240 Volt, 50/60Hz Power consumption: 35W Discs Compatibility: BD,DVD,DVD+/-R/RW,VCD,CD-DA,CD-R/RW. Video out CVBS: 1.0V(p-p)/75 , sync, negative polarity, RCA pin jack x 1 HDMI Audio out 2 channel out: RCA pin jackx2 Coaxial out: 0.5V(p-p)75 , RCA pin Jack x l Frequency response: 20Hz to 20kHz S/N ratio:>90dB Total harmonic distortion: <-65dB [Accessories] Remote Control x 1 User s Manual x 1 Specifications are subject to change without notice.
