Owner's manual

NICD/NIMH - DISCHARGE MODE (cont.)

Toggle and hold the joysick to the right (►) for three seconds to

begin discharging.

Once disharging has commenced, the charger

will display the following real-time informa-

tion: battery type, discharging current, battery voltage, discharging

time and discharged capactiy.

Once discharging is complete, the screen will read “

[DISCHARGE

FINISHED]

” and the charger will emit a chiming sound. Toggle left

(◄) once to stop discharging. You may toggle left (◄) at any time

during the discharging process to stop discharging.

NiMH 1.0A 5.96V

DSC 001:43 00030

NICD/NIMH  REPEAK MODE

In Re-Peak Charge mode, the charger can automatically peak

charge the battery 1-3 times consecutively. This is good for

conrming that the battery is fully charged and for checking how

well the battery receives fast charges. A ve minute cool-o delay

occurs after each re-peak charge.

BEFORE YOU BEGIN CHARGING YOUR BATTERY,

MAKE SURE YOU HAVE READ AND UNDERSTAND

ALL OF THE WARNINGS AND SAFETY INFORMATION

CONTAINED ON PAGES 49.

Select the correct battery type by following

the instructions on page 29. Once you have

set the correct battery type, toggle up (▲) or down (▼) until you

see the “

NiMH RE-PEAK” screen.

Toggle right (►) once and the number of re-peak cycles will begin

ashing. Toggle up (▲) or down (▼) to change the number of re-

peak cycles you want the X1 Pro to execute. The X1 Pro can re-peak

NiMH RE-PEAK

Warning