Owner's manual
29
BEFORE YOU BEGIN CHARGING YOUR BATTERY,
MAKE SURE YOU HAVE READ AND UNDERSTAND
ALL OF THE WARNINGS AND SAFETY INFORMATION
CONTAINED ON PAGES 49.
Toggle right (►) once and the amp rate value
will begin ashing. Toggle up (▲) or down
(▼) to adjust the value to the desired rate. Follow the instructions
provided with your battery when setting the amp rate.
The X1Pro oers the following NiCd/NiMH charge modes: Charge,
Auto Charge, Discharge, Re-Peak and Cycle.
BEFORE SELECTING A CHARGE MODE, IT IS CRITI
CAL THAT YOU SELECT THE CORRECT TYPE OF
LITHIUM BATTERY TO BE CHARGED. FAILURE TO DO
SO CAN RESULT IN DAMAGE TO THE BATTERY AND
POSSIBLE EXPLOSION.
Selecting a Battery Type
When you power on the X1 Pro you will
automatically be taken to the “
PROGRAM
SELECT
” screen. Toggle up (▲) or down (▼) until you see the
battery type you wish to charge. Now, toggle right (►) once to
enter the “
NiMH” or “NiCd” Program The default charge mode will
be “
CHARGE”.
PROGRAM SELECT
NiMH BATT
NiMH CHARGE
CURRENT 1.6A
This program is only suitable for charging/discharging NiCd/NiMH
batteries.
NiCd/NiMH
NICD/NIMH CHARGE MODES
NICD/NIMH CHARGE MODE
Warning
Warning