Owner's manual
20
LITHIUM CHARGE MODE cont.
LITHIUM BALANCE CHARGE MODE
cell count does not match, toggle left (◄) once to return to the
previous screen and carefully check the number of cells of the bat-
tery pack before proceeding.
Once charging has commenced, the charger
will display the following real-time informa-
tion: battery type/cell count, charging current, battery voltage,
charging time and charged capactiy.
DURING CHARGING, THE BATTERY SHOULD BE
PLACED INSIDE A FIREPROOF/RETARDANT BAG
AND ON A FIREPROOF SURFACE, AWAY FROM
OTHER COMBUSTIBLE OBJECTS.
If you are using a balance adaptor, during
charging you may toggle up (▲) once to
view the voltage of each individual cell.
Once the battery is fully charged, the screen will read
“
[END:FINISH]” and the charger will emit a chiming sound.
Toggle left (◄) once to stop charging. You may toggle left (◄) at
any time during the charging process to stop charging.
Caution
Li3s 1.2A 12.69V
CHG 022:43 00682
4.09 4.09V 4.09V
0.00 0.00V 0.00V
This function is for balancing the voltage of individual lithium-
polymer battery cells while charging. In order to use the Balance
Mode, the battery must have a balance lead. Charging in this mode
is dierent from the normal mode because the built-in processor
monitors the voltage of each individual cell and controls the input
current fed into each cell in order to equalize the voltage. Use of
a balance adaptor with any battery that has a balance lead will
improve the performance and lifespan of the battery.