Owner's manual

This program is only suitable for charging/discharging lithium

(LiPo/LiIon/LiFe) batteries.

LITHIUM CHEMISTRY BATTERIES

LITHIUM  CHARGE MODES

LITHIUM  CHARGE MODE

The X1 Pro oers the following lithium charge modes: Charge, Bal-

ance Charge, Fast Charge, Storage and Discharge.

BEFORE SELECTING A CHARGE MODE, IT IS CRITI

CAL THAT YOU SELECT THE CORRECT TYPE OF

LITHIUM BATTERY TO BE CHARGED. FAILURE TO DO

SO CAN RESULT IN DAMAGE TO THE BATTERY AND

POSSIBLE EXPLOSION.

Selecting a Battery Type

When you power on the X1 Pro, you will

automatically be taken to the last used

operation“

PROGRAM SELECT” screen. If the battery type you wish

to use is dierent than what is displayed, toggle up (▲) or down

(▼) until you see the type of Lithium battery you wish to charge.

Once you have selected the battery, toggle

right (►) once to enter the “

LiPo” program

screen. The default charge mode will be “

BALANCE,” toggle up (▲)

or down (▼) to cycle through the dierent charge modes. Toggle

right (►) once to select the desired charge mode.

BEFORE YOU BEGIN CHARGING YOUR BATTERY,

MAKE SURE YOU HAVE READ AND UNDERSTAND

ALL OF THE WARNINGS AND SAFETY INFORMATION

CONTAINED ON PAGES 49.

Warning

PROGRAM SELECT

LiPo BATT

LiPo BALANCE

0.8A 22.2V(6S)