Owner's manual

16
BATTERY CONNECTIONS (cont.)
OPERATING THE X1 PRO CHARGER
CONNECTING THE BATTERY
Before connecting a battery, it is absolutely essential to
check one last time that you have set the parameters correctly.
If the settings are incorrect, the battery may be damaged and
could even burst into  ames or explode. To avoid short circuits
between the banana plugs, always connect the charge leads
to the charger  rst, and only then to the battery. Reverse the
sequence when disconnecting the pack.
BALANCE SOCKET:
The balance wire attached to the battery must be connected to
the charger with the black wire aligned with the negative symbol
(
▬
). Take care to always maintain correct polarity! This im-
age shows the correct way to connect your battery to the X1
Pro while charging with the use of a balance adaptor. This is the
recommended method for charging and discharging.