Manual

33
A beep sounds to con rm the user’s operation every time a button is pressed.
The buzzer or melody sounds at various times during an operation to con rm a
di erent mode change. These functions can be switched on or o .
See pg. 28 for instructions on accessing the “
Key Beep“ and “Buzzer“ screen.
Press the ► button once and (Key Beep) “
ON” will begin
 ashing. Use the ✚ or
▬
buttons to turn “Keep Beep“
o . Press the ► button once and (Buzzer) “ON” will
begin  ashing. Use the ✚ or
▬
buttons to turn “Buzzer“
o  .
This function monitors the voltage of the input source used to power the char-
ger. If the voltage drops below the user setting, the program will end forcibly to
protect the input source.
See pg. 28 for instructions on accessing the “
Input Power Cut-off“ screen.
Press the ► button once and the voltage value will
begin  ashing. Use the ✚ or
▬
buttons to change the
voltage.
Press ► to set the voltage.
Lithium
Additional Features & Settings
Key Beep & Buzzer
Input Power Cut-o
Key Beep ON
Buzzer ON
Key Beep OFF
Buzzer OFF
Input Power Low
Cut-off 10.0V