Data Sheet

10
MENU STRUCTURE
The Memory Name menu is where the parameters
for charging or discharging batteries are dened. The
corresponding settings are then stored in the memory (See
Page 14 for setting process parameters).
The Data View menu displays information pertaining to the
charging and discharging processes of a Lithium chemistry
battery. When a balancing cable is attached, the screen will
also display the voltage of the individual cells as well as the
highest and lowest cell value.
The User Setup menu allows the user to customize certain
features of the Power Peak E7 (See Page 14 for more
information on the parameters and defaults).
STOP/ESC
button
STOP/ESC
button
Once plugged in, turn on the power switch, the charger briey displays Hitec Power Peak E7
then the Memory screen appears. Use the STOP/ESC button to scroll through the menus.
[01] Memory Name...
LiPo 7.4V 200mAh
Chg Current : 2.0mA
dChg Current : 1.0mA
dChg Volt :3.2V/C
TVC Volt :4.20V
[ User Setup ]
Language : English
Rest Time : 10 Min
Safety Cut : ON
Safety Time : 120 Min
Capa Cut : ON
Capa Value : 500mAh
Key Beep : ON
[ DATA VIEW ]
Main : 11.39 V
Max : 3.81V
Min : 3.79V
3.79 V 3.79 V 3.81 V
0.00 V 0.00 V 0.00 V
0.00 V