Owner's manual

7 Channel 2.4 GHz Aircraft Computer Radio System

Section 6: Heli Programming Menu

Pitch Curve cont.

11. Press the back button to return to the model function menu.

To disable the pitch curve:

1. Scroll to highlight the “MIX” eld in the pitch curve menu and

press the jog dial to activate the menu.

2. Select “INH” (inhibit) and press the jog dial to conrm your

selection.

3. Press the Back button to return to the model function menu.

You may also select a ight condition in this menu by activating the desired ight condition.

Note

TipTip

Tip

Caution

Swash Ring

The Swash Ring Mix limits the travel of the servos attached to the helicopter swash plate. This can be used

to help prevent binding of the control system when using large control movements for aerobatics. There

are no adjustments to the swash ring mix.

1. From the model menu, rotate the jog dial to highlight “Swash

Ring” and press the jog dial once to enter the activation menu.

2. Press the jog dial again to activate the menu.

3. Rotate the jog dial to select ACT (activate), then press the jog

dial to conrm your selection and activate the Swash Ring mix.

4.Press the back button to return to the model function menu.