Owner's manual
7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 5: Acro and Glider Programming Menu
73
Butterfly Mixing (GLID Only) cont.
To congure buttery:
1. From the model menu, rotate the jog dial to highlight “B-Fly”
and press the jog dial once to enter the activation menu.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select “ACT” (activate), then press the jog
dial to conrm your selection and activate the buttery menu.
4. Scroll to highlight the “AILE” eld and press the jog dial to
activate the menu.
5. Rotate the jog dial to input the desired travel for the “AILE”
servo when Buttery is active. Press the jog dial to conrm
your input.
6. If the model has a second aileron servo, repeat step 5 in the
“AIL2” eld.
7. Scroll to highlight the “ELEV” eld and press the jog dial to
activate the menu.
8. Rotate the jog dial to input the desired travel for the “ELEV”
servo when Buttery is active. Press the jog dial to conrm
your input.
9. If the model has a second elevator servo, repeat step 8 in the
“ELE2” eld.
10. Scroll to highlight the “FLAP” eld and press the jog dial to
activate the menu.
11. Rotate the jog dial to input the desired travel for the “FLAP”
servo when Buttery is active. Press the jog dial to conrm
your input.
12. If the model has a second ap servo, repeat step 11 in the
“FLP2” eld.
13. Press the back button to return to the buttery menu.
14. Scroll to highlight the “SPEED” eld and press the jog dial to
activate the menu.
15. Scroll to dene the amount of time (0.0 to 10.0 seconds) for
the buttery mix to fully deploy. Press the jog dial to conrm
your selection.