Owner's manual

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 3: System Menu Programming
37
Trim Step
The Trim Step screen is utilized to change the amount of movement seen on the servos with each
adjustment, or “beep” of the gimbal trim levers. Larger values equate to greater servo movement with
each trim adjustment.
1. From the System Menu scroll to TRIM STEP and press the jog
dial to enter the Trim Step Menu.
2. Scroll to the trim you want to adjust and push the jog dial to
activate the adjustment. Use the jog dial to change the value
and press it to conrm your entry. Trim Step adjustment
values are from 1~200.
3. Use the back button to exit the Trim Step Menu.
Trainer Function
The Flash 7 can be paired with another Hitec transmitter to create a master/slave setup that is useful
when instructing student pilots. The Flash 7 can be used to help teach students how to y utilizing the
various trainer functions of the transmitter.
Utilizing the various trainer functions of the Flash 7, you can:
- Select which controls (RUDD, THRO, AIL, ect.) the student will command.
- Use the mix feature to give the student a percentage of the control throw while the master has the
remainder.
In addition to training, you can also use the Flash 7’s pass-through function to control head tracking
devices for First Person View ying.
The Flash 7 is compatible with all other Hitec transmitter products using the 3.2mm stereo plug.
Note
TipTip
Tip
When using the Flash 7 in trainer mode, the following items must be veried before ying:
- The master radio must be programmed with the model to be own.
- The slave or student transmitter must have the proper servo reverse and trim settings to match
the master transmitter.
Warning
Note
TipTip
Tip
Caution
4. Press the back button return to the system menu.