Owner's manual

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 3: System Menu Programming
31
Model Select Menu cont.
4. Reset the active model memory slot to factory default settings:
b. Scroll to “RESET” and press
the jog dial.
a. Select the model you wish
to reset.
c. When prompted that you want to reset the model, select yes and
press the jog dial to conrm your entry. You have now cleared all
of the programming for the model. The only settings that will
remain are the model name, receiver type and wing and tail types.
5. Delete a model memory:
a. In the model select menu, highlight the
model you wish to delete and press the jog dial.
b. Scroll to
“DELETE”
and press
the jog dial.
c. When prompted
that you want to
delete the model,
select yes and
press the jog
dial to conrm
your entry.
6. Rename a model:
a. In the model select menu, highlight the model you wish to rename. Press the jog dial to conrm your
selection.
b. Scroll to RENAME and press
the jog dial to enter the
naming screen.
d. Use the jog dial to scroll
through the characters and
press it once to select the
character.
e. Repeat steps c and d until you have renamed the model.
f. Press the back button to return to the model select menu.
c. In the eld displaying the
current model name, scroll to
the character you want to
change and press the jog dial
to activate it. The cursor will
blink under the active character.
You can only reset the active model.
Note
TipTip
Tip
You cannot delete the active model.
Warning
Note
TipTip
Tip
Caution