Owner's manual

7 Channel 2.4 GHz Aircraft Computer Radio System

Section 2: Quick Start Guides

Airplane Quick Start Guide cont.

6. When asked to create a new model select “Yes.” This will bring

up the Model Type screen.

Scroll to “Acro/Glid” or “Select Acro/Glid.”

Now scroll to “wing” and press the jog dial to activate the

choices. If you have 1 aileron servo, select 1AILE. If your plane

has two aileron servos, select 2AILE. Press the jog dial once to

conrm your selection.

7. Next, select your plane’s tail type. Select “Normal” and press

the jog dial once to conrm your entry .

8. Now press the back button once. You will be prompted to

choose the receiver type. Press the jog dial once to activate

the receiver selections and scroll to the receiver you have in

your aircraft. Press the jog dial once to conrm your receiver

selection.

We are programming a new model into the model memory slot number two, not the model

memory slot one. For the purpose of this exercise it will ensure a fresh model memory with no

existing programming.

Note

TipTip

Tip

Depending on what you select here, and for the following menu choices, the radio will

automatically optimize the functions for your choices. In other words, if you select a wing type

without aps, there will be no ap function control in that model memory’s programming

selection.

Note

TipTip

Tip