Instructions

35
DPC-11
UNIVERSAL PROGRAMMING INTERFACE
FOR HITEC PrOGRAMMABLE SERVOS
With the DPC-11 software you have the ability to
save and load servo parameter files. This is helpful
when needing to setup multiple servos with the
same parameters. The DPC-11 software also has
the ability to restore the factory defaults file in the
event the user setup doesn’t operate correctly. The
following details how to use these features.
Loading and Saving Files, Restoring
Factory Defaults
Once you have completed your servo setup and
written the setup to the servo click on “SAVE” to
open the save file dialog box. Navigate to the location
where you want to save your file. Enter a name for
your servo and click “Save.” You have successfully
saved your servo parameters to a file.
1. Save a File
Once you have your desired Fail Safe position set,
click on the “Fail Safe On” button to activate it. You
can check the position using the fail safe position test.
9. Fail Safe On/Off
HS-7XXX/5XXX Series Programming cont.