Instructions

28
DPC-11
UNIVERSAL PROGRAMMING INTERFACE
FOR HITEC PrOGRAMMABLE SERVOS
HS-7XXX/5XXX Series Programming
Introduction
NOTE – If you always want the DPC-11 software
to launch in HS-7XXX/5XXX Series Mode, you can
change the start window setting in the upper left
hand corner of the window.
WARNING
WARNING
The DPC-11 Programming Software gives the
user the ability to adjust several parameters
of the Hitec HS-7XXX/5XXX series of Digital
Programmable Servos. Additionally users can
test their servos to see that they are functioning
properly. To program your HS-7XXX/5XXX
Series servo, launch the DPC-11 software from
the desktop icon and select HS-7XXX/5XXX
Series from the startup menu.
User Interface The main screen of the HS-7XXX/5XXX Series
programming interface is broken into four
sections, Connection, File Operations, Testing
and Programming.
Change what window is shown when
launching program.
Return to the main menu.
File operation section.
Testing section.
Programming section.
Read data from servo.
Write data to servo.
HS-7XXX/5XXX Series Programming