Instructions

DPC-11

UNIVERSAL PROGRAMMING INTERFACE

FOR HITEC PrOGRAMMABLE SERVOS

To load a parameter file, click

on “OPEN,” navigate to the

location where you have stored

your file, and click on the file

name to open. You will get the

“Open completed” confirmation

that the file has loaded.

2. Load a File

To restore the servo to its factory default settings,

click on the “Program Reset” button.

3. Restoring Factory Defaults

With the DPC-11 software, you have the ability to

save and load servo parameter files. This is helpful

when needing to setup multiple servos with the

same parameters. The DPC-11 software also has

the ability to restore the factory defaults file in the

event the user setup doesn’t operate correctly. The

following details how to use these features.

Loading and Saving Files, Restoring

Factory Defaults

Once you have completed your servo setup and

written the setup to the servo, click on “SAVE” to

open the save file dialog box. Navigate to the location

that you want to save your file to, enter a name for

your servo and click save. You have successfully

saved your servo parameters to a file.

1. Save a File