Data Sheet

RB-Hit-114

HS-45HB Micro Servo Motor

The HS-45HB Micro Servo Motor offers the economy and durability of our other famous micro servos, but

now with a ball bearing supported output shaft and Karbonite gears.

Specifications:

• Motor type: 3 Pole

• Bearing type: Top ball bearing

• Speed (4.8V/6.0V): 0.14 / 0.12 sec @ 60 deg.

• Torque oz./in. (4.8V/6.0V): 14 / 17

• Torque kg./cm. (4.8V/6.0V): 1.0 / 1.2

• Size in Inches: 0.92 x 0.38 x 0.88

• Size in Millimeters: 23.37 x 9.65 x 22.35

• Weight ounces: 0.28

• Weight grams: 7.94

Advanced Servo Specifications:

• Control System: +Pulse Width Control 1500usec Neutral

• Operating Voltage Range: 4.8V - 6V

• Operating Temperature Range: -20°C to +60°C (-4°F to +140°F)

• Idle Current: 8mA

• No Load Running Current (4.8V/6.0V): 100mA/60°

• Stall Current (4.8V/6.0V): 440mA

• Dead Band Width: 5usec

• Potentiometer Type: 2 Slider/Direct Drive

• Connector Wire Length: 250mm (9.84 in)

• Connector Wire Gauge: 28AWG

PAGE 1
RB-Hit-114 HS-45HB Micro Servo Motor The HS-45HB Micro Servo Motor offers the economy and durability of our other famous micro servos, but now with a ball bearing supported output shaft and Karbonite gears. Specifications: • Motor type: 3 Pole • Bearing type: Top ball bearing • Speed (4.8V/6.0V): 0.14 / 0.12 sec @ 60 deg. • Torque oz./in. (4.8V/6.0V): 14 / 17 • Torque kg./cm. (4.8V/6.0V): 1.0 / 1.2 • Size in Inches: 0.92 x 0.38 x 0.88 • Size in Millimeters: 23.37 x 9.65 x 22.35 • Weight ounces: 0.