Data Sheet

:40±5°/ONE SIDE PULSE TRAVELING 400usec
:CORELESS METAL BRUSH
:DIGITAL AMPLIFIER WITH MOSFET DRIVE
HITEC RCD KOREA INC.
:1M CYCLE LONG LIFE/INDIRECT DRIVE
:40x20x37mm(1.57x0.78x1.45in)
:CLOCK WISE/PULSE TRAVELING 1500 TO 1900usec
:+PULSE WIDTH CONTROL 900~2100us,1500us NEUTRAL
HEAT SINK FOR MOTOR
FOR 1/10 EP off road and on load
CONNECTOR WIRE STRAND COUNTER
OPERATING VOLTAGE RANGE
CONNECTOR WIRE GAUGE
CONNECTOR WIRE LENGTH
HORN GEAR SPLINE
POTENTIOMETER TYPE
OPERATING TRAVEL
RUNNING CURRENT
OPERATING TEMPERATURE RANGE
BALL BEARING
SPLINED HORNS
GEAR MATERIAL
DEAD BAND WIDTH
DIMENSIONS
AMPLIFIER TYPE
MOTOR TYPE
DIRECTION
STALL CURRENT
IDLE CURRENT
WEIGHT
1.TECHNICAL VALUE
TEST VOLTAGE
STANDING TORQUE
STALL TORQUE
OPERATING SPEED
CONTROL SYSTEM
:300mm(11.81in)
:1us
:20AWG
:80EA
:DUAL/MR106
:-20°C TO +60°C(-4°F TO +140°F)
WATER & DUST RESISTANCE
ULTRA HARDNESS SHAFT WITH 3 AXIAL METAL BUSHING
:0.105sec/60°AT NO LOAD
:-
:30mA AT STOPPED
300mA
:3,200mA
:AT 4.8V
:4.7V TO 7.4V
AT 7.4V
0.07sec/60°AT NO LOAD
13.0kg.cm(181.53oz.in)
-
30mA AT STOPPED
500mA
5,200mA
1us
D930SW SUPER SEED DIGITAL SERVO
:1 METAL-PLASTIC & 3 STEEL GEARS
GENERAL SPECIFICATION OF
:8.0kg.cm(111.71oz.in)
:66.0g(2.32oz)
:HD-IM25(F TYPE)
:25 SEGMENTS/Ø6.00
DURABLE STEEL GEARS WITH DUAL BALL BEARING
AT 6.0V
10.0kg.cm(139.63oz.in)
-
0.085sec/60°AT NO LOAD
30mA AT STOPPED
400mA
4,200mA
1us
PROGRAMMABLE HIGH RESPONDENCE DIGITAL AMPLIFIER WITH MOSFET DRIVE