User manual

- 06 -
WARNING AND SAFETY NOTES
These warning and safety notes are particularly important.
Please follow the instructions for maximum safety; otherwise the
charger and the battery can be damaged or even worse, cause
a fire.
WARNING AND SAFETY NOTES
Never leave the charger unattended when it is connected to its
power supply. If any malfunction is found, TERMINATE THE
PROCESS AT ONCE and refer to the operation manual.
Keep the charger well away from dust, damp, rain, heat, direct
sunshine and vibration. Never drop it.
The allowable input voltage is 11-18V DC/110-240V AC.
This charger and the battery should be put on a heat-resistant,
non-flammable and non-conductive surface. Never place them
on a car seat, carpet or similar surface. Keep all flammable,
volatile materials away from the operating area.
Make sure you know the specifications of the battery to be
charged or discharged to ensure it meets the requirements of
this charger. If the program is set up incorrectly, the battery and
charger may be damaged. It can cause a fire or an explosion
due to overcharging. This warranty is not valid for any damage
or subsequent damage arising as a result of misuse or failure
to observe the procedures outlined in this manual.