Manualshelf

User manual

ManualsBrandsHITEC ManualsModel Making Charger SystemsScale model multifunction charger 12 V, 220 V 10 A Multicharger X1MF LiPolymer, Li-ion, NiCd, NiMH, Lead-acid
12345678910
- 04 -
SPECIAL FEATURES
Automatic charging current limit
Charging current can set by the user when charging NiCd or
NiMH batteries. The 'AUTO' charging mode, however, is
recommended when charging NiMH batteries with low
impedance and capacity.
Capacity and Temperature Limits
The charge process will terminate if either the charging capacity
or battery temperature exceeds the limit set by the user.
Temperature function requires an optional temperature probe,
which is not included with the X1.
Processing time limit
Protect your battery by setting a maximum time limit for charging
and discharging.
Input power monitoring
The X1's input voltage is monitored to protect the battery from
becoming damaged. The process ends automatically if it drops below
the limit.
Data store/load
A maximum of five setting profiles can be stored for your
convenience. The X1 will store the data pertaining to a program's
settings and you can call up data at anytime.
Cyclic charging/discharging
A battery can be cycled 1 to 5 times. This process is good for
refreshing and balancing your battery.