User manual

- 25 -

End Voltage

12.6V(3S)

Capacity Cut-Off

ON 5000mAh

Safety Timer

ON 200min

Temp. Cut-Off

ON 80C 176F

Ext.Temp 26C

4.14 4.16 4.09

0.00 0.00 0.00

VARIOUS INFORMATION IN THE PROGRAM

You can view various information on the LCD screen during the charging

and discharging process. Pressing the DEC key will display these settings.

You can press the INC key to monitor the voltage of each cell while the

battery is connected to each port of the charger.

This screen shows the final voltage when the

program has ended.

This screen shows that the capacity cut-off

function is turned on and shows the setting

capacity value.

This screen shows that the safety timer is on

and duration of time in minutes.

This screen shows the temperature cut-off

function is turned on.

The external temperature is displayed when

the temperature probe is used.

When the battery is connected with each port

through a cable, you can check voltage of

each cell in the battery pack. When the cable

is connected to the ports on the charger, the

program will display voltage of up to 6 batteries.

DEC