User manual

- 23 -

DISCHARGING OF THE PB BATTERY

PROGRAM SELECT

SAVE DATA

SAVE [01] NiMH

14.4V 3000mHh

NiMH CHARGE At*

CUR LIMIT 5.0A

NiMH DISCHARGE*

1.0A 11.0V

NiMH CYCLE *

DCHG>CHG 3

Save ...

DATA STORAGE PROGRAM

INCDEC

Batt type

Stop

Start

Enter

Start

Enter

Start

Enter

‘>3 seconds’

Voltage Data

number

Capacity

Type of

battery

For your convenience, the X1 has a data storage and load program.

It can store five battery data representing the respective charge and

discharge specifications for each battery. You can call back the data

when charging or discharging without setting up the program over

again. Press the START/ENTER key to modify the menu, and use

the INC or DEC to set up the parameters.

Setting of the parameters in this screen will

not affect the charge and discharge process.

They just represent the specification of the

battery. For example, the NiMH battery pack

including 12 cells has a capacity of 3000mAh.

Press the INC and DEC key simultaneously

to make the current field blink to switch the

charge mode.

Set up the discharge current and cutoff voltage.

Set up the charge/ discharge sequence and

cycle number.

Save the data.