User manual

- 21 -
NIMH CYCLE
DCHG>CHG 3
INCDEC
-+
INCDEC
-+
Batt type
Stop
Start
Enter
‘>3 seconds’
NIMH 1.0A 7.42V
D>C 022:45 00890
DCHG 1 1314mAh
CHG 1 1430mAh
Battery
type
Elapsed
time
Discharge
or charge
current
Battery
voltage
Discharged
or charged
capacity
CHARGE/DISCHARGE AND DISCHARGE/CHARGE CYCLE
OF NICD/NIMH BATTERY
CHARGE/DISCHARGE AND DISCHARGE/CHARGE CYCLE
OF NICD/NIMH BATTERY
You can set the cycle sequence on the left
and the number of cycles on the right.
The battery can be cycled 1-5 cycles.
Press the BATT TYPE/STOP key to stop the
program. You can press the START/ENTER
key to alter the charge or discharge current.
The sound indicates the end of the program.
When it approaches the end of the cycle
program, you can see the capacity of the
battery being charged or discharged. You
can press the INC or DEC key to scroll
through the results of each cycle.
CHARGING OF THE PB BATTERY
Set up the charge current on the left and the
nominal voltage on the right. Charge current
can be set from 0.1-5.0A. The voltage should
match the battery being charged. Press the
START/ENTER key for more than 3 seconds
to start charging.
Pb CHARGE
4.0A 12.0V(6P)
INCDEC
-+
INCDEC
-+
Batt type
Stop
Start
Enter
‘>3 seconds’
The screen displays the real-time charging
status. Press the START/ENTER key to alter
the charge current. Press the START/ENTER
key again to store the parameter settings you
set. Press the BATT TYPE/STOP key to end
the program.
Pb-6 4.0A 12.59V
CHG 022:43 00682
Battery
type
Elapsed
time
Charge
current
Battery
voltage
Charged
capacity