User's Manual

To turn the system on and off, use the following sequence at all times.
Turning Off -Turn off the receiver, then turn off the transmitter.Turning On -Turn on the transmitter, then turn on the receiver.
4. Set-up and Use of the LITE4 2.4
A. ID-Setup A.K.A, Link or Bind
Non-telemetry RXs (MINIMA & MICRO Series)
Press and hold the link button on Receiver and turn on the power.
Press and hold the button on the module, and turn on the transmitter.
BLUE LEDs will blink rapidly
to find the transmitter signal.
Release the link button when
BLUE LED on receiver glows steady.
When the link is completed, RED LED
on the module will blink.
Release the link button.
Check if RED LED is blinking.
press the link button for 2 sec.
2.4GHz 6 Channel
Aircraft Receiver
2.4GHz 6 Channel
Aircraft Receiver
Link
V-TAIL
OFF
ELEVON
CH1 CH2 CH3
CH4
REV
N
OR
2.4GHz 4 Cha
nnel Aircraft Radio
Link
V-TAIL
OFF
ELEVON
CH1
CH2
CH3
CH4
REV
NOR
2.4GHz 4 Ch
NOR
Link
V-TAIL
OFF
ELEVON
CH1 CH2 CH3
CH4
REV
NOR
2.4GHz 4 Ch
NOR
10
To save the setting, please reboot both transmitter and receiver. When they are turned on again, RED LED on the module(or radio)
and BLUE LED on the receiver will glow steady.
6
Channel
R
eceiver
8
RED
LED
RED
LED
CH
1
CH
2
C
H
3
CH
4
R
E
V
N
O
R
Link
V
-
TAIL
O
F
F
ELE
V
ON
C
H1
CH
2
CH3
C
H4
REV
N
O
R
2.4GHz 4 Cha
nnel Aircraft Radio
Link
V-TAIL
OFF
ELEVON
CH1
CH2
CH3
CH4
REV
NOR
2.4GHz 4 C
hannel Aircraft Radio
CH1
C
H
2
CH
3
CH
4
RE
V
N
O
R
CH1
CH2
CH3 CH4
REV
CH1
CH2
CH3 CH4
REV
LITE4 2.4 Instruction Manual