User's Manual

4. Charging Specifications
A. Transmitter/Receiver battery
• The initial charge on your system should be at least 24 hours to insure a full
charge.
• Subsequent charges should be at least 12 - 20 hour.
• It is best to put you system (TX and RX) on charge the night before you plan to
use it.
• To charge your batteries first make sure your transmitter and receiver are off; then
connect the wall chargers outputs to the charging jack on the transmitter and the
charge receptacle on the switch harness or directly to the battery. Make sure the
green (TX) and red (RX) light comes on. If it does not check for proper
connection and/or power to the outlet.
• Be careful not to leave your transmitter on charge for more than 24 hours to
prevent any damage to the battery or charger.
• Always charge your system before you go out to fly.