User's Manual

38
7.3. Entering the model name
Six letters, numbers or symbols, are available for the model name. The following
characters can be used:
ABCDEFGHIJKLMNOPQRSTUVWXYZ-0123456789
§ Search for the menu point NAME using the 1 button
§ The first character flashes, and can be changed using
the digi-adjustor.
§ Press the handle button
G
to move on to the next
character, and from the last back to the first again.
Press any menu button (except 1) to return to the operating display.
7.4. Erasing
There are two methods of erasing the contents of a model memory.
1. VALUES (just erases the variable values)
In this case erasing means: the values are reset to the
default settings corresponding to the selected vehicle
type.
The vehicle type, model name, servo norm, direction,
travels, and AM/FM selection are not erased
2. ALL (erases all data)
This option resets the model memory completely to the
default settings. These include:
The vehicle type STAND (standard) Servo travels 100%
§ Search for the menu point ERASE using the 1 button
§ Select the VALUE or ALL option using the digi-adjustor
§ Hold the handle button
G
pressed in for longer than 3 seconds to confirm.
Press any menu button (except 1 ) to return to the operating display.
7.5. Reverting to the PREVious state
Any changes which you make to the settings for a particular model are not stored
permanently until you switch off the transmitter or switch to a different model. As a
result it is possible to switch back to the previous settings, and this is the menu point
you use. You can reverse any changes which you have carried out
v since you last switched memory, and/or
v since you last switched on the transmitter
This is a very useful option, as it makes it safe and easy to „try something out“.
§ Search for the menu point „PREV“ using the 1 button
§ Hold the handle button
G
pressed in for longer than
3 seconds to confirm the function.
Press any menu button (except 1 ) to return to the operating
display.
NAME
MIRAGE
ERASE
VALUES
ERASE
ALL
PREV
3