User's Manual

37
7. Model memories 11
The model memories are used to store all the settings which you have entered for a
particular vehicle. These settings include:
v Modulation (FM/AM)
v Servo direction, signal format, centre, travels
v Settings for throttle, brake and steering
v Timer settings
v Trim settings
The information in the active model memory is updated when you switch off the
transmitter or switch to a different memory.
v PROFI CAR 403 6 model memories
v PROFI CAR 707 12 model memories
The memory space available is generous, and the spare memories can be exploited
to experiment with copying model data, or trying out different settings for a
particular race track.
7.1. Switching to a different model memory
§ Search for the menu point GO TO using the 1 button
§ Select the target memory with the digi-adjustor
The screen shows the name, memory number and trim
settings.
§ Hold the handle button
G
pressed in for longer than
3 sec to effect the switch.
A long beep confirms the switch, and the screen reverts to the operating display.
7.2. Copying
§ Search for the menu point COPY using the 1 button
§ Select the target memory with the digi-adjustor
Number
Name
§ Hold the handle button
G
pressed in for longer than
3 sec to confirm the copy.
The copy process is carried out, and the operating display re-appears. At the same
time the transmitter switches to the memory which you selected as destination for
the copy. The copy process copies the name as well as all the settings (but not the
trims). The previous contents of the target memory are overwritten by the new data.
05
KOPIE
BUGGY2
03
GO TO
STAMP