User's Manual
15
2.3. Adjusting STEERING LL
Steering settings:
CECENTRNTR
Servo centre (straight ahead) - 50% to + 50%
TRAVTRAV
Minimum steering travel,
if set using digi-adjustor
30% to 100%
DUALDUAL
Auto Dual Rates
DE = delay 0 to 5
RT = reduced travel
Switch off with „DE = 0“
50% to 100%
SLOWSLOW
Retards steering movements
Enter/exit turn separately
0.0 sec to 1.0 sec
EXPOEXPO
Exponential steering curve
+100% = soft
-100% = hard
§ Use the L button to search for the menu point SLOW, EXPO, CENTR or
TRAV
§ Set the value you want using the digi-adjustor
§ Press any button (except L ) to return to the operating display.
2.4. Adjusting THROTTLE AA
You must set either a 2-point or 5-point throttle curve, depending on the vehicle
type you have selected.
For the STANDard and TRUCK vehicle types:
2 point throttle curve
with EXPO
LL
Idle 0% to 100%
IT
Initial throttle =
initial throttle value when trigger
leaves deadband
0% to 100%
FT
Full Throttle 0% to 100%
EXP
Exponential throttle curve
+100% = soft start
-100% = hard start
For the vehicle types „2+1 CH“, „4 CH“ and „5 CH“
5-point throttle curve
Range Default setting
ID
Idle 0% to 50 % 15%
IT
Initial throttle = initial throttle value
when trigger leaves deadband
0% to 100% 30%
2T
3T
4T
Points on the throttle curve 0% to 100%
45%
60%
75%
FT
Full throttle 0% to 100% 100%