User Manual

02
INTRODUCTION
Power Source
Charge Power
Discharger Power
Cell Count
Current Drain for Balancing Lithium
Charge Termination
NiCd/NiMH
Lead-Acid and Lithium
Dimensions
Net Weight
12V DC Car Battery or
11-15V DC Power Supply
50 Watts, current is regulated accordingly
e.g. 11.1 V battery, charge current approx. 4.5 A
e.g. 22.2 V battery, charge current approx. 2.2 A
5 Watts, current is regulated accordingly
1-15 NiCd/NiMH cells
1-6 LiPo/LiIon/LiFe cells
1-10 Lead-Acid cells (2V - 20V)
300mA
Automatic, negative delta-peak method
Automatic, voltage-dependent, CC-CV process
8.9” x 6.7” x 2.6”
3.4 lbs.
Operating Voltage Range
DC 11 - 15 Volt
The Hitec X4 allows you to charge up to four different batteries simultaneously. The
charger will automatically charge all 4 batteries at a time to their maximum capacity. Addi-
tionally the batteries being charged do not need to have the same configuration or the
same chemistry. Therefore you can connect any one of a NiMH/NiCD/LiPo/LiFe battery
into any of the charging ports. This eliminates the time consuming efforts of charging all
your batteries separately.
Specifications