User Manual
98
Charger Layout
X4 AC Pro Speci cations
AC Input 100 - 240 Volts AC
DC Input 11 - 18 x Volts DC
Total Charge Circuit Power on AC Power 200 Watts with Power Distribution
AC Power Distribution
Channels A & C 100 Watts Total
Channels B & C 100 Watts Total
Power Distribution Adjustable Range
Channels A and B 50 ~ 100 Watts
Channels C and D 0 ~ 50 Watts
Total Charge Circuit Power on DC Power
300 Watts Total Power
(CHs A & B 100W each / CHs C & D 50W each )
Charge Current
Channels A & B: 0.1 ~ 10.0 Amps
Channels C & D: 0.1 ~ 5.0 Amps
Charge Voltages
NiMH / NiCd: Uses Delta Peak Detection
LiPo: 4.18 ~ 4.25 V/Cell LiHV: 4.25 ~ 4.35 V/Cell
LiFe: 3.58 ~ 3.7 V/Cell LiIon: 4.08 ~ 4.2 V/Cell
Discharge Wattage 10 Watts per Channel
Discharge Current 0.1 ~ 2.0 Amps per Channel
Discharge Cut-o Voltages
NiMH / NiCd: 0.1 ~ 1.1 Volts per Cell
LiPo: 3.0 ~ 3.3 V/Cell LiHV: 3.1 ~ 3.4 V/Cell
LiFe: 2.6 ~ 2.9 V/Cell LiIon: 2.9 ~ 3.4 V/Cell
LiPo, LiHV, LiFe and LiIon Cell Count 1 ~ 6
Balance Current for LiXXx Balance 200 mAh
NiMH / NiCd Cell Count 1 ~ 15 cells
Pb/ Lead Acid Voltage Range 2 ~ 20 VDC
Battery Capacity Range 100 ~ 50,000 mAh
Auxillary Output 5 Volt 2.1 Amp DC USB Device Charge Port
Communication Methods
USB Port for PC Control & Firmware Upgrades
Bluetooth 4.0 for Smartphone Apps
Dimensions
3.8 x 7.2 x 2.8 in.
97 x 182 x 71 mm.
Weight 47 oz. / 1335 g.
Channel D
LCD Display
Micro USB Port for
PC Link
USB Port
Channel C
Channel A
Cooling Fan
Channel B
Cooling fan
DC Input
11-18V
Power
Switch
AC Input
100-240V
A Universal Balancing Cord
B. XH Type Balancing Cord
C. XT-60 Charge Cable
D. 2 Pin T-type Charge Cable
E. 2 x Bare Charge Cables
F. Receiver Battery Charge Cable
G. DC Power Source Cable
H. AC Power Cord
Included Accessories
C
A
B
H
G
D
E
F